Ultra-flexible High Current Cable
This copper braid, silicon coated 120 mm2 cable allows you to squeeze the highest performance off your raptor system, especially when putting the multi-turn technique into practice.
Description
The pre-cut lengths are finished with pressed steel terminals, drilled for M12 bolts.
This cable will withstand a permanent 500-A injection or shorter 1,000 A (3 min.) or 2,000 A (3 sec.) tests. Available lengths: 3, 6 and 9 meter (9, 17, and 26 ft).
Order codes: CBL3M-RAP, CBL6M-RAP, CBL9M-RAP.
You can group up to six M12 cables in parallel to attain larger current values with the optionally available copper plates.
The FLIR CM72 clamp meter gives you better access to wiring in hard-to-reach places. Made…
The FLIR MR265 is a professional pin and pinless moisture meter with thermal imaging designed…
AEMC 10KV MEGOHMMETER GRAPHIC BACKLIGHT ALARM TIMER
The FLIR CM82 is an industrial-grade power clamp meter engineered with advanced power analysis, harmonics…
The MR277 is the first FLIR building inspection system to combine the advantages of Infrared…
The FLIR IRW-xPC/xPS joins the existing FLIR IR Window family to help you inspect more…
AEMC 6505 MEGOHMMETER
The FLIR CM174 has the power to lead you to problems you can’t see with…
BANNER REMOTE SENSOR 53014
The FLIR CM57 is an ergonomic tool designed to simplify difficult current measurements. Made with…
The FLIR CM78 is a True RMS industrial clamp meter for the electrician who works…
The FLIR CM275 clamp meter combines thermal imaging with electrical measurement into powerful inspection, troubleshooting,…
Copyright © 2024 Butler & Land Technologies, LLC. All Rights Reserved.
Web Design by Red Spot Design. Return & Refund Policy, Terms & Conditions
