Cat. #2132.59
200A, 1mV/A, Lead
Designed for digital multimeters and other measuring instruments with voltage inputs. Enables the measurement or recording of current with instruments without current ranges. Voltage output (1mV per amp measured) is proportional to the current measured (through the jaws). Includes integral 5? (1.5m) leads terminated by shrouded banana plugs.
The MN251T is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The MN251T offers a voltage output of 1mV per Amp measured. The MN251T has insulated 10ft (3m) coaxial cable terminated by BNC connector.
ABB CONTROLS N.O. AUX. CONTACT
ABB 22MM YELLOW PUSHBUTTON
ABB LED BULB WHITE 24V AC/DC -20
ABB PUSH BUTTON OPERATOR FLUSH RED
ABB XT1 3-POLE TERMINAL COVER
ABB DIN PLATE KIT
ABB 22MM FLUSH RED PB MOM. NO METAL BEZEL CP130R-10
ABB P/L ACTUATOR W/GRN LENS
ABB 110V CONTROL RELAY CONTACTOR
ABB 3-POS SELECTOR SWITCH BLUE
ABB INSERT 22MM LABEL ON / OFF
ABB 22MM GREEN PB FLUSH ILLUM. CHROME METAL BEZEL
Copyright © 2024 Butler & Land Technologies, LLC. All Rights Reserved.
Web Design by Red Spot Design. Return & Refund Policy, Terms & Conditions
