Ultra-flexible High Current Cable
This copper braid, silicon coated 120 mm2 cable allows you to squeeze the highest performance off your raptor system, especially when putting the multi-turn technique into practice.
Description
The pre-cut lengths are finished with pressed steel terminals, drilled for M12 bolts.
This cable will withstand a permanent 500-A injection or shorter 1,000 A (3 min.) or 2,000 A (3 sec.) tests. Available lengths: 3, 6 and 9 meter (9, 17, and 26 ft).
Order codes: CBL3M-RAP, CBL6M-RAP, CBL9M-RAP.
You can group up to six M12 cables in parallel to attain larger current values with the optionally available copper plates.
The MR277 is the first FLIR building inspection system to combine the advantages of Infrared…
The FLIR CM72 clamp meter gives you better access to wiring in hard-to-reach places. Made…
FLUKE EARTH GROUND CLAMP
The FLIR Si124-PD acoustic imaging camera can help you detect partial discharge from high-voltage electrical…
FLIR BATTERY CHARGER FOR T6XX SERIES
FLIR THERMAL NIGHT VISION CAMERA 30HTZ
The FLIR CM57 is an ergonomic tool designed to simplify difficult current measurements. Made with…
BANNER INFRARED SENSOR
FLIR’s IR Windows add a barrier between you and energized equipment, protecting you from arc…
The FLIR MR265 is a professional pin and pinless moisture meter with thermal imaging designed…
The FLIR CM82 is an industrial-grade power clamp meter engineered with advanced power analysis, harmonics…
The FLIR Si124-LD acoustic imaging camera can help you locate pressurized leaks in compressed air…
Copyright © 2024 Butler & Land Technologies, LLC. All Rights Reserved.
Web Design by Red Spot Design. Return & Refund Policy, Terms & Conditions
