Palette of resistors for test load conditioning
Mounted in the top cover of the PTE-100-C unit, the PTE-FCC Load Option consists of a group of power resistors and a capacitor set, designed to be connected directly to the current output.
Description
The resistance value is selected by connecting to the desired tap.
APPLICATIONS
The application of the resistor set is to increase the Load value when working with very low relay loads.
This load improves the regulation of the current output value and the output distortion in the waveform. This enables the variac to work with a better efficiency.
The Capacitor can be combined with the Resistor set and different angle values up to nearly 90? can be obtained.
The FLIR Si124-PD acoustic imaging camera can help you detect partial discharge from high-voltage electrical…
The FLIR CM174 has the power to lead you to problems you can’t see with…
DWYER MINIHELIC 0-10IN WC
AEMC 6505 MEGOHMMETER
The FLIR CM57 is an ergonomic tool designed to simplify difficult current measurements. Made with…
The FLIR CM85 is an industrial power clamp meter with advanced power analysis and variable…
The FLIR MR265 is a professional pin and pinless moisture meter with thermal imaging designed…
The FLIR CM74 clamp meter gives you better access to wiring in hard-to-reach places. Made…
FLIR BATTERY CHARGER FOR T6XX SERIES
BANNER INFRARED SENSOR
The MR277 is the first FLIR building inspection system to combine the advantages of Infrared…
The FLIR CM83 is an industrial-grade power clamp meter engineered with advanced power analysis, harmonics…
Copyright © 2024 Butler & Land Technologies, LLC. All Rights Reserved.
Web Design by Red Spot Design. Return & Refund Policy, Terms & Conditions
